MIXING PILE DATA LOGGER (CFA)

Guide construction, which realize pile point navigation by importing design data and guide operators to carry out construction.

1. Control indicators, ramming point location, 

2. Number of rammer passes, 

3.Rammer drop distance, 

4. Ramming amount  

5. Remote management, 

6. Information management cloud platform, 

7. Mobile APP real-time control of the construction site are included.

1. 7-inch touchable LCD display can save 15,000-20,000 data group;

2. It detects length, fail installation, angle, pressure, time and other parameters during Vertical Wick Drain installation.

3. When the Vertical Wick Drain fail installation, the recorder can record and display the length of the failure and automatically calculate the effective length;

4. The sensor has strong seismic capacity, can adapt to various types of construction machinery, and it can be applicable to any width of Vertical Wick Drain;

5. It can be used for small paper printing or A4-size paper printing at the construction site, and derived data with USB to print.

6. After power off, the data memory can be saved for 5 years; no need to replace the battery;

7. It can apply in AC220V AC or DC19-36V DC.

• Host: 1.0% accuracy

• Depth: 0-99m, accuracy is 0.05% and resolution is 0.01m

• Angle: ±30°, 0.5% accuracy, resolution 0.01°

• Pressure: 0-500KG, 0.5% accuracy, resolution 1kg

• Power supply: AC 220V; DC 19-36V;

• Storage: each group of 752 piles, a total of 32 groups

1. Boot interface: recorder connects the power supply, switch on the power, the recorder host interface display

2. Setting interface: click “Settings”, according to the actual situation.

 

  

Note: In order to facilitate the observation, click numerical parts on the red box as shown “downlink length”, “release tape speed”, “pressure”, “angle”, set the appropriate maximum value of the actual construction.